Inground pool kits

Inground pool kits




Inground pool kits are an alternative to having a pool company install an inground fiberglass pool in your backyard. Installation of these kits usually includes digging, building the pool walls, plumbing the pool, laying the foundation and installing the liner. It is a large DIY project, but inground fiberglass pool installation can be done successfully with the proper planning.

Buying the Right Pool Kit

Decide which pool kit to purchase by comparing prices, quality of materials and the amount of technical help that is available to answer your questions as you build the inground fiberglass pool. You need to consider the soil conditions and size of inground fiberglass pool you want as well. You can add optional features such as steps, ladders and volleyball nets in your inground fiberglass pool.

Planning

Make a definite plan that includes a timetable. If you are hiring contractors for backfilling or plumbing, you will need to be sure they are available and fit into your timetable for the installation of inground fiberglass pool. Also do a budget so that you are not surprised by the expenses that come up during the installation. Get estimates from the contractors for inground fiberglass pool.



Installing an inground fiberglass pool will add significant value to a home. Previously, it required a contractor to install the inground fiberglass pool and the price could run up to $20,000 or more. Today, an inground fiberglass pool kit can be purchased for as low as $1,500 and installed by the homeowner, saving a large sum.

Budget and Pool planning for inground fiberglass pools

1. An in-ground pool kit is significantly cheaper than a professional inground fiberglass pool installation, but will still cost a lot. Before you begin, it is necessary to set up a budget to determine where the money will be spent. The majority of the budget should go to the inground fiberglass pool, but there will also be landscaping around the pool, fencing and local permits for installation.



Once you've determined how much you can afford to spend on the inground fiberglass pools and obtained the necessary permits, begin the project. Measure out your yard, particularly the space where you plan to install the inground fiberglass pool. These measurements will help you find a pool that fits your space while still keeping you within your budget. After all, purchasing a 20-foot lap pool kit won't fit into a backyard that's only 15 feet across.

Installing In-Ground Pools

2.There are several sizes, styles and types of In-Ground Pools and all of them will come with their own specific installation guides. The most common type of in-ground pool kit is built using polymer panels or steel wall panels.

To begin, excavate a hole large enough to accommodate your new pool. If you've chosen to have a deep end in your pool, accommodate this as well. Once the pool has been dug out, installs wall panels within the digging site according to the shape and provided directions. Next, concrete or dirt will be poured and packed in around the exterior of the pool.



Once the concrete or dirt has reached the halfway point, stop and install the pipes and other plumbing around the outer edge of the inground fiberglass pool. If you are using concrete, allow the concrete to dry before installing the pipes. Once the pipes are installed, fill the exterior the rest of the way with dirt or concrete. Again, if you are using concrete, allow the concrete to fully dry before continuing with the rest of the project.

The bottom of the pool is shaped using a vermiculite cement mixture, which may be included in your pool kit or can be purchased from the same manufacturer you purchased the kit through. Allow the vermiculite mixture to dry as suggested by the package before continuing with installing the pool liner and filling the pool.



Once filled, end up the landscaping surrounding the pool, install necessary hedge or finish any other projects. Then, sit back, relax and enjoy your new inground fiberglass pool.